Cabinet Accessories
Power Rails:
click the product codes to see actual photo. | ||||||||
Outlets
| Socket
| S.
| Socket
| MCB
| Plug
| P.
| Plug
| Product code
|
| Orientation: Vertical | ||||||||
| 9 way | 10A |  | NZ/AU Standard | 10A | 10A | | NZ/AU Standard | 11290083 |
| 18 way | 10A | | NZ/AU Standard | 10A | 10A | | NZ/AU Standard | 11290084 |
| 10 way | 15A |  | NZ/AU Standard | 16A | 15A | | NZ/AU Standard | 11290087 |
| 20 way | 15A | | NZ/AU Standard | 16A | 15A | | NZ/AU Standard | 11290089 |
| Orientation: Horizontal | ||||||||
| 6 way | 10A | | NZ/AU Standard | 10A | 10A | | NZ/AU Standard | 11290080 |
| 10 way | 10A | | NZ/AU Standard | 10A | 10A | | NZ/AU Standard | 11290006 |
| 6 way | 15A | | NZ/AU Standard | 16A | 15A | | NZ/AU Standard | 11290085 |
| 6 way | 16A |  | IEC320 C19 | 16A | 15A | | NZ/AU Standard | 11290086 |
| 10 way | 10A |  | IEC320 C13 | 16A | 15A | | NZ/AU Standard | 11290090 |
| 6 way | 10A | | NZ/AU Standard | N.A. | 10A | | IEC320 C14 | 11290082 |
Clever power rails / Network controled devices
Click here for the range of Clever PDU available.
Shelves:
Front-fixed cantilever shelves.
These shelves only require front rail support can can be fitted in any
of our 19" cabinets (with suitable depth) and can support up to 20KG in weight.
11380106 - 200mm deep 1RU
11380013 - 273mm deep 2RU
11380015 - 400mm deep 3RU
Side-fixed shelves (45KG) for Q-Cabinets and P-Cabinets.
11820028 - 340mm deep for 600 deep cabinets
11820027 - 400mm deep for 600 deep cabinets
11280047 - 540mm deep for 800-1000 deep cabinets
11820016 - 400mm deep sliding shelf for 600-800 deep cabinets
Side-fixed shelves (90KG) for Q-Cabinets and P-Cabinets.
11820020 - 400mm deep for 600-800 cabinets
11820041 - 600mm deep for 800-1000 deep cabinets
11820031 - 400mm deep sliding shelf for 600-800 deep cabinets
Fans and Cabinet Cooling:
11920001 - Two-way fan kit for Q-Series and P-Series cabinets 
11920006 - Four-way fan kit for Q-Series and P-Series cabinets 
11920022 - Front-fixed HIPERCOOLER 3-speed fan unit. The Modempak HiperCooler is a cost effective and highly efficient fan cooling aid
designed to solve potentially disasterous overheating issues in server racks greater
than 800mm deep that have been loaded with a high density of equipment.
Indended for installations with under floor/cabinet cooling.
11890005 - Chimney for Q-Cabinets. 1000mm high, 470x160mm. Cable Management:
Horizontal Cable Management Rails: 
|
15510003 - Wire rings 15510020 - Recessed and shallow rings 15510032 - Recessed with deep rings 15510051 - Five port panel with rubber grommets 15510054 - Snap rings 15510055 - Covered rings 15510057 - Brush insert port 15510017 - Tie-down bar |
Vertical Cable Management Rings: 
|
15510004 - Small rings, offset base 11380033 - Large rings 15510042 - 65mm rings, set of 2 15510011 - 105mm rings, set of 2 15510012 - 2RU ABS Plastic |
Horizontal Blank Panels: 
|
15310062 - 1RU 15310064 - 2RU 15310067 - 3RU 15310070 - 4RU 15310072 - 5RU 15310075 - 6RU |
Multipurpose Bases for Q-Series cabinet. 
|
Allows the cabinet to be raised 80mm off the floor for cable access. 11180108 - W600mm x D600mm 11180109 - W600mm x D800mm 11180120 - W600mm x D1000mm 11180121 - W600mm x D1200mm 11180122 - W800mm x D800mm 11180123 - W800mm x D1000mm 11180124 - W800mm x D1200mm 11180111 - Heavy Duty Castor set for Multipurpose Base |
Cable Tray: 
|
11280120 - 38RU Wire type basket cable tray. 11280121 - 45RU Wire type basket cable tray. |
Cage Nuts:
11180025 - M6 Pack of 10
11180026 - M6 Pack of 50
Server Rail Kits for P-Cabinets:
11280065 - 6RU
11280066 - 12RU
11820032 - 18RU
11820011 - 25RU
Supplied as a pair with nuts and bolts.
